Skip to content
Wholesalers access
Wholesalers access
Textile vinyl PS FILM A4 Fluor Yellow

Textile vinyl PS FILM A4 Fluor Yellow

by Siser
€1.15 - €1.15
€1.15
€1.15 - €1.15
€1.15

The A4 size sheet is the best solution for small jobs, crafts and samples.

With a smooth and fine finish, Siser PS Film textile vinyl is the vinyl range most used by all professionals looking for a quality, reliable, thin and wash-resistant material.

CHARACTERISTICS

    • Satin finish with very vivid colors.
    • Includes transporter . No need to purchase it separately.
    • Minimum thickness: only 90 microns .
    • Certified to Oko-Tex Standard 100 Class I.
    • Perfect for cutting in Cricut or Silhouette .
    • To transfer onto cotton, polyester and blend .

    Attention: this vinyl is not suitable for leather, nylon or silicone fabrics.

    Preferred by the entire industry for its bright colors, ease of cutting and peeling as well as resistance to washing and its new width of 0.30m, makes it perfect for cutting on your Cricut or Cameo.

    CHARACTERISTICS

    • Vivid and bright colors.
    • Polyurethane (PU) material.
    • Carrier included. No need to purchase it separately.
    • Minimum thickness: only 90 microns.
    • Certified with the Öko-Tex Standard 100 Class I standard. It is a material that meets environmental standards.
    • Textile vinyl compatible with Cricut and Cameo cutting plotters
    • Perfect for transferring on the following materials:
      • 100% cotton.
      • 100% polyester.
      • Cotton and polyester blends.

    For difficult materials such as leather, nylon or lightly siliconed fabrics, the recommended vinyl is PS Film Extra.

    HOW TO USE

    • Cut the textile vinyl in mirror mode at about 60gf with a standard blade.
    • Peel excess material. To best peel vinyl, heat the bottom plate of the iron for a few seconds. Next, place the vinyl on the plate for a couple of seconds so that it gains some temperature and proceed to remove the excess vinyl with the peeler.
    • Place the material on the garment, with the transparent carrier on top.
    • Apply heat (150ºC for 15 seconds at medium pressure: 3-4 bars).
    • Remove the clear carrier hot or cold.


    WASHING INSTRUCTIONS

    • Wait 24 hours after ironing before washing.
    • Do not dry clean: you could lift the vinyl.
    • We recommend not using dryers.
    • Wash at maximum 80ºC.
    • Resists centrifuging.
    • Do not use aggressive chemical agents.

    in these cases.

    HOW TO USE

    • Cuts PS Film in mirror mode at about 60gf with standard blade.
      • Cricut: Standard Blade - Iron-on.
      • Silhouette: standard blade 3 - textile vinyl - speed 8 - force 6
    • Peel off excess material.
    • Place the material on the garment with polyester backing on top.
    • Iron at 150ºC for 15 seconds .
    • Remove the hot carrier.

    WASHING INSTRUCTIONS

    • Wait 24 hours after ironing before washing.
    • Do not dry clean.
    • Wash at maximum 80ºC.
    • Resists centrifuging.
    • Do not use aggressive chemical agents.

    REF. A0022A4