Skip to content
Wholesalers access
Wholesalers access
Cricut Smart Stencil Film 33cm x 3.6m

Cricut Smart Stencil Film 33cm x 3.6m

by Cricut
€26.99 - €26.99
€26.99
€26.99 - €26.99
€26.99

With this new vinyl you can create projects in large runs on a wide variety of surfaces such as wood, canvas, plastics, fabrics, papers and much more.

In addition, this template has the advantage of detaching easily and without leaving any type of residue on the material.


CHARACTERISTICS

  • Size: 33cm x 3.6m
  • Color blue.
  • Plastic material.
  • Perform as many repetitions as you need of the same pattern.
  • Does not leave residue.
  • Its adhesive on the back prevents having to constantly change templates and the color from overflowing.
  • Compatible with Cricut Maker 3 and Explore 3
  • Durable and repositionable.
  • Surface recommendation: wall.

HOW TO USE

Cut the Stencil vinyl with a Cricut cutting plotter

  1. Place the template material on the plotter. Remember that you will not need a mat because it is a Smart material .
  2. Select the size of the images and the material "Vinyl Stencil" and load it into the machine.
  3. Consult the vinyl cutting guide to adjust to your machine settings.
  4. Press the “Go” button when it flashes.

  5. Preparation with transfer tape

    1. Remove the negative pieces from the images leaving the liner intact. You can help yourself with your Cricut tool set to make it easier.
    2. Carefully place the transfer tape (sticky side down) over the images. To avoid the appearance of bubbles, use a spatula and rub it from the center to the edges.
    3. Peel off the vinyl liner at approximately 45º.
    4. Now you can start painting on the stencil and you can remove the vinyl stencil when it is dry.

Preparation with transfer tape

  1. Remove the negative pieces from the images leaving the liner intact. You can help yourself with your Cricut tool set to make it easier.
  2. Carefully place the transfer tape (sticky side down) over the images. To avoid the appearance of bubbles, use a spatula and rub it from the center to the edges.
  3. Peel off the vinyl liner at approximately 45º.
  4. Now you can start painting on the stencil and you can remove the vinyl stencil when it is dry.

REF. 2008848